How to Attach a Scooter Bell to Your Flyer Via Pro

Quick answer

You can attach the Radio Flyer Scooter Bell to your Flyer Via Pro handlebars in about five minutes using just your hands—no tools required.

Installation steps

1. Position the bell on the handlebar: Choose a spot on the left or right side of the handlebar where your thumb can easily reach the striker. Slide the bell's mounting bracket over the handlebar tube. Make sure the bell faces forward so the sound projects ahead of you.
2. Tighten the mounting screw: Turn the screw on the bracket clockwise by hand until the bell is snug against the handlebar. Do not overtighten—you should still be able to rotate the bell slightly by hand. If the bell wobbles after tightening, add a thin rubber shim (like a strip of inner tube) between the bracket and handlebar for a grippier fit.
3. Test the bell and adjust: Press the striker lever a few times to confirm the ring is clear and the bell doesn't shift. If the sound is muffled or the bell moves, loosen the screw, reposition, and retighten. Check the screw monthly, especially after riding on bumpy terrain, as vibration can loosen the mount over time.

Product facts

• Flyer Via Pro: The Flyer Via Pro features a suspension fork that absorbs shock and a 750W brushless rear hub motor for robust acceleration and hill-climbing. Its sturdy handlebars provide a solid mounting point for accessories like a bell, and the bell's sound is easy to hear even over the motor's hum.

  

• Scooter Bell: The Scooter Bell is a simple, classic accessory designed to provide an audible alert while riding, compatible with select Radio Flyer scooters. It fits securely on handlebars of various diameters and requires no tools, making it a quick, low-cost safety upgrade for your e-bike.