How to Attach a Cell Phone Mount to Your eBike Handlebars
By Radio Flyer: Red Wagons, Tricycles & Outdoor Toys | Published: 2026-10-29
Category: How-to Guides
Learn how to quickly and securely attach a cell phone mount to your eBike handlebars without tools, plus common mistakes to avoid.
Quick answer
Attaching a cell phone mount to your eBike handlebars is a quick, tool-free process. The Radio Flyer Cell Phone Mount secures phones 3.5”–6.5” and clamps onto the front handlebar in under a minute.
Why handlebar placement matters
Mounting your phone on the handlebar keeps your GPS or ride app visible without taking your eyes off the road. It also frees up your hands for safe steering and braking.
On an eBike, handlebar space can be tight with throttle, display, and brake levers. A compact mount like the Radio Flyer Cell Phone Mount fits without interfering with controls.
Common mistakes to avoid
Placing the mount too close to the stem or grips can block access to the display or shifters. Leave at least 1–2 inches of clearance on each side.
Over-tightening the clamp can damage the handlebar or the mount itself. Tighten just enough to prevent slippage during rides.
Step-by-step installation
- Choose the mounting spot: Select a flat section of the handlebar away from grips, brake levers, and the stem. Ensure the mount won't block your view of the display or controls. A spot near the center of the bar often works best for balance and visibility.
- Open the clamp: Loosen the clamp screw on the mount enough to slide the clamp around the handlebar. Do not remove the screw completely. Keep the screw in place so you don't drop small parts.
- Position and tighten: Slide the clamp onto the handlebar at your chosen spot. Orient the mount so the phone cradle faces you. Tighten the screw by hand until the mount is snug and won't rotate. Check that the mount is level before fully tightening.
- Insert your phone: Place your phone into the cradle, ensuring it sits securely within the adjustable arms. The mount should hold the phone firmly without pressing on buttons or the screen edge. If the phone feels loose, adjust the arms or reposition the mount.
- Test before riding: Gently tug the phone and mount to confirm they are secure. Take a short test ride on flat ground to ensure the mount stays put and your phone is accessible. Re-tighten the clamp if you notice any movement after the first ride.
Product details
- Cell Phone Mount: Compatible with phones 3.5”–6.5” and attaches to the front handlebar with no tools required. You can mount almost any smartphone in seconds without hunting for a screwdriver, making it easy to swap between bikes or remove the mount when parked.
Cell Phone Mount
